330 370 Express Cruiser 1997 SWITCH kit including Covers/Actuators
PNL-BW180VT-stg
Electrical Switch for Sea Ray and Other Boats
OEM-quality marine electrical switch engineered for reliable boat system control. For Sea Ray, Boston Whaler, Grady White, and other cruisers.
Product Specifications
Type: Electrical Switch
Configuration: Switch - Standard
Application: boat electrical switching and control
SKU: ELC-010029
Details: Carling Contura III V series rocker Switch AND Actuator kit This is a SWITCH AND ACTUATOR kit. This set is for the 1997 ish - 330 and 370 Express Cruiser. This kit is for the early 1997 boats. The later 330/370 EC's had a different switch panel and we have a separate listing for those switch/actuator kits. This kit includes a hole plug for the "Accessory" position at the left side of the main switch panel. If you have added a switch to that position, you will need to order it separately This kit DOES NOT INCLUDE the cockpit lighting switches that are located on the transom. If you would like to order those switches, you will need one (1) VDDA-1 to replace SR part# 648063, one (1) V1D1-2 to replace 648097, and one (1) VLD1-1 to replace 773879. You will also need to order the actuators for those switches. (two C3-I, and one C3-F) This kit includes one VLD1-1 (on)/off/(on) momentary switch that replaces the original "Windlass Control" toggle switch. We have found that most customers request this change when ordering a panel set. This Kit DOES INCLUDE the following: Actuators:1 C3-L horn symbol5 C3-I black with no lens14 C3-F black with single blue lens2 C3-K Ignition start/stop symbols2 C3-M Trim tab symbol1 VV Hole Plug VHPSwitches:1 VLD1-3 SR part# 1733928 or 681494 windlass main1 VB4A-1 SR part# 670539 emergency start9 V1D1-2 SR part# 648097 bilge pumps, wipers, depth, spoiler lights, baitwell fill, baitwell discharge, washdown3 VAD1-1 SR part# 681510 Running lights, Anchor light, bilge blowers1 V2D1-3 SR part# 679332 horn2 VM4J-1 SR part# 670521 ignition6 VLD1-1 SR part# 773879 Windshield vent, hatch lift, hatch lift power, power seat, trim tabs, windlass control1 V1D1-1 SR part# 681502 Engine Sync
Why OEM Electrical Switches Matter
OEM electrical switches are engineered for your boat's voltage and amperage specifications. They deliver reliable operation, proper electrical protection, and long-term durability in marine environments. Using correct switches prevents electrical system failures, fires, and equipment damage.
Quality electrical components ensure system safety and reliability. Always use OEM switches rated for your boat's electrical system specifications.
Quick FAQs
Will this switch fit my boat?
Designed for Sea Ray and other standard boats. Electrical switches must match your boat's voltage and amperage specifications. Verify compatibility before ordering. Contact [email protected] with your boat model and electrical system details.
What's the difference between Single Pole and Double Pole?
Single Pole switches control one circuit. Double Pole switches control two independent circuits simultaneously. Choose based on your boat's electrical configuration. Contact [email protected] if unsure which type you need.
What's the difference between Momentary and Locking?
Momentary switches activate only while pressed. Locking (or toggle) switches stay in position until toggled again. Choose based on your application. Wrong type can cause electrical system issues.
Can I use any electrical switch?
No. Electrical switches must match your boat's voltage (12V, 24V, etc.) and amperage rating exactly. Using wrong switches risks electrical fires and system failure. Always use OEM switches rated for your specific boat system. Never substitute with automotive or general-purpose switches.
Do you have switches for older boat models?
Yes. We stock electrical switches for boats from 1980s-current production. Contact [email protected] with your boat's model year and electrical system specifications.
Internal Reference:
ELC-010029