370 Sundancer 1997-1999 SWITCH kit including Covers/Actuators
PNL-BW180VT-stg
Electrical Switch for Sea Ray and Other Boats
OEM-quality marine electrical switch engineered for reliable boat system control. For Sea Ray, Boston Whaler, Grady White, and other cruisers.
Product Specifications
Type: Electrical Switch
Configuration: Switch - Standard
Application: boat electrical switching and control
SKU: ELC-010016
Details: Carling Contura III V series rocker Switch AND Actuator kit This is a SWITCH AND ACTUATOR kit You may end up with an extra on/off switch or two depending upon how your boat was equipped This set is for the 1997-1999 370 Sundancer The switches included are the following;QTY8 V1D1-2, SR# 648097 on/off with lamp. Bilge Pump, Electronics, Autopilot, Wipers, Synchronizer, Spotlight, Bilge Lights4 VLD1-1, SR# 773879 momentary (on)/off/(on), windshield vent, trim tabs, power seat1 V2D1-3, SR# 679332 momentary (on)/off, Horn1 VB4A-1, SR# 670539 Double Pole momentary (on)/off, Emergency Start2 VM4J-1, SR# 670521 Ignitions OFF/ON/(ON) Engine ignition3 VAD1-1, SR# 681510 ON/OFF w/lamp double pole. Blowers, Anchor Light, Running Light2 VDD1-1, SR# 648063 ON/ON Cockpit Lights, Spoiler Lights1 V8D1-1, SR# 648113 (on)/off/(on) Windlass The actuators included are the following:QTY14 VVC3-F, SR# 679324 Black with single blue lens 1 VVC3-L, SR# 759084 Black with horn symbol4 VVC3-I, SR# 681486 Black, no lens2 VVC3-K, SR# Engine start/stop symbol2 VVC3-M, SR# Trim Tab symbol1 VHP - hole plug - for boats with no engine sync There were variations in these boats. Some boats had 2 extra switches on the far left switch panel, you will need to order those separately.1 - VLD1-1 - Hatchlift1 - V1D1-2 - Accy1 - C3-i - Actuator no lens1 - C3-F - Actuator single blue lens
Why OEM Electrical Switches Matter
OEM electrical switches are engineered for your boat's voltage and amperage specifications. They deliver reliable operation, proper electrical protection, and long-term durability in marine environments. Using correct switches prevents electrical system failures, fires, and equipment damage.
Quality electrical components ensure system safety and reliability. Always use OEM switches rated for your boat's electrical system specifications.
Quick FAQs
Will this switch fit my boat?
Designed for Sea Ray and other standard boats. Electrical switches must match your boat's voltage and amperage specifications. Verify compatibility before ordering. Contact [email protected] with your boat model and electrical system details.
What's the difference between Single Pole and Double Pole?
Single Pole switches control one circuit. Double Pole switches control two independent circuits simultaneously. Choose based on your boat's electrical configuration. Contact [email protected] if unsure which type you need.
What's the difference between Momentary and Locking?
Momentary switches activate only while pressed. Locking (or toggle) switches stay in position until toggled again. Choose based on your application. Wrong type can cause electrical system issues.
Can I use any electrical switch?
No. Electrical switches must match your boat's voltage (12V, 24V, etc.) and amperage rating exactly. Using wrong switches risks electrical fires and system failure. Always use OEM switches rated for your specific boat system. Never substitute with automotive or general-purpose switches.
Do you have switches for older boat models?
Yes. We stock electrical switches for boats from 1980s-current production. Contact [email protected] with your boat's model year and electrical system specifications.
Internal Reference:
ELC-010016