VLDA-3 Carling (ON)/OFF/(ON) double pole momentary rocker switch, clear lamps in position #1&2.

Please Click Here to See Our Library/Tech Center for Videos, Articles & FAQ's

VLDA-3 (ON)/OFF/(ON) DPDT W/ SINGLE 12V DEPENDENT CLEAR LAMP

Specifications:

• FP Marine SKU:ELC-009085
• Series: Contura V
  
• Function: Momentary (ON)/OFF/(ON) DPDT
  
• Lamp: Double 12V Dependent Clear position 1 (top),
  
• *OEM Part #(s): VLDA-3
• *Sea Ray Part #(s):
• *Substitution(s):

* Part #(s) may vary among boat models/years & are for search/reference only.

• This is a Switch Body Only. Actuators are sold separately.
• (ON)/OFF/(ON) configuration, double pole double throw. momentary-on/off/momentary-on

• 12V clear dependent lamps in the #1&2 (top&bottom) positions. "dependent" lamps get their power internally when the actuator moves to the "on" position.

• 7 terminal; Top right terminal is the ground for the lamps, The middle two terminals are power "in" and the other two pairs of terminals are power "out". The switch is "off" when the actuator is in the middle position. The appropriate lamp will illuminate when the actuator is depressed up or down. The lights are wired to terminals 1 and 3

• At times these switches are wired differently. The important thing to remember is how the switch operates. When the bottom of the actuator is depressed, the middle two terminals make contact with the top two (active) terminals that are side by side (ignore the very top terminal for the light, for the moment) . When the top of the actuator is depressed, the middle two terminals make contact with the bottom two terminals. As with all double pole switches, the two sides are independent of each other. So the terminals on the left side of the switch never make contact with the terminals on the right side of the switch unless you install an external jumper wire.

• Common for Marine, RV, automotive, and other 12V DC applications.

• Part# VLDA-3