VLD1-3 Carling (ON)/OFF/(ON) double pole momentary rocker switch, independent clear lamp in position #1.
SUR-000009-1791788
Please Click Here to See Our Library/Tech Center for Videos, Articles & FAQ's
VLD1-3 (ON)/OFF/(ON) DPDT W/ SINGLE 12V INDEPENDENT CLEAR LAMP
Carling Contura V-Series Rocker Switch Body
This is a Switch Body Only. Actuators/Covers are sold separately.
Specifications:
- FP Marine SKU:ELC-009081
- Series: Contura V
- Function: Momentary (ON)/OFF/(ON) DPDT
- Lamp: Single 12V Independent Clear position 1 (top),
- *OEM Part #(s): VLD1-3
- *Sea Ray Part #(s): # 681484 681494 1733928
- *Substitution(s):
* Part #(s) may vary among boat models/years & are for search/reference only.
Carlingswitch (ON)/OFF/(ON) double pole V series Contura rocker switch body.
-
This is a Switch Body Only. Actuators are sold separately.
-
(ON)/OFF/(ON) configuration, double pole double throw. momentary-on/off/momentary-on
- 12V clear independent lamp in the 1 top position. An independent lamp has both a positive and negative terminal as opposed to the standard switches that just have a negative terminal. Independent lamps can be lit independently of the actuator position as opposed to standard dependent lamps that get their power internally when the actuator moves to the on position.
- 8 terminal; Terminals are for the lamp, Terminal #7 is the ground and Terminal #8 is the power. Terminals #2 and #5 are power in and the other two pairs of terminals #3,#6 and #1,#4 are power out. The switch is off when the actuator is in the middle position. Terminals #3 and #6 are power out when the actuator is in the up position. Terminals #1 and #4 are power out when the actuator is in the down position.
- At times these switches are wired differently. The important thing to remember is how the switch operates. When the bottom of the actuator is depressed, the middle two terminals make contact with the top two (active) terminals that are side by side (ignore the very top 2 terminals for the light, for the moment) . When the top of the actuator is depressed, the middle two terminals make contact with the bottom two terminals. As with all double pole switches, the two sides are independent of each other. So the terminals on the left side of the switch never make contact with the terminals on the right side of the switch unless you install an external jumper wire.
- Common for Marine, RV, automotive, and other 12V DC applications.
- Windlass Main switch, Sea Ray part# 681484 681494
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
Internal Reference:
ELC-009081
Click the icons below for instructional videos on our YouTube channel, and to follow us on Facebook & Instagram.We want to see your boat! Send us your photos to be featured: [email protected]
Related Products
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.