V2DA-3 Carling (ON)/OFF Momentary single pole rocker switch w/independent 12V lamp
PNL-BW180VT-stg
Electrical Switch for Sea Ray and Other Boats
OEM-quality marine electrical switch engineered for reliable boat system control. For Sea Ray, Boston Whaler, Grady White, and other cruisers.
Product Specifications
Type: Electrical Switch
Configuration: Switch - Momentary
Application: boat electrical switching and control
SKU: ELC-009029
Details: Please Click Here to See Our Library/Tech Center for Videos, Articles & FAQ's V2DA-3 (ON)/OFF SPST TERMINAL GUARDS W/ 12V CLEAR LAMP Carling Contura V-Series Rocker Switch Body This is a Switch Body Only. Actuators/Covers are sold separately. (Shop Our Wide Variety of Contura Actuators/Covers Here!) Specifications: FP Marine SKU: ELC- Series: Contura V Function: Momentary (ON)/OFF SPST Lamp: Single 12V Clear, position 1 (top) *OEM Part #(s): V2DA-3*Sea Ray Part #(s): *Substitution(s): Carlingswitch (ON)/OFF single pole V series Contura rocker switch body. This is a Switch Body Only. Actuators are sold separately. (ON)/OFF configuration. Momentary ON, normally OFF 12V independent clear lamp in the 1 position. An independent lamp has both a positive and negative terminal as opposed to the standard switches that just have a negative terminal. Independent lamps can be lit independently of the actuator position as opposed to standard "dependent" lamps that get their power internally when the actuator moves to the "on" position 4 terminal; Terminal #8 is power and Terminal #7 is ground for the lamp, Terminal #2 is power in and Terminal (#3) is Momentary power out. Part# V2DA-3 Sea Ray part # 799304 -or 0799304 Blowers. The parts manual for 2001 340DA incorrectly calls for part # 1374396 which is a 24v switch. CONFIRM 1st - Please check your existing switch carefully for the number of terminals, the number of lamps, and the color of the lamps. (you will have to remove your actuator to see the color of the lamp) We have found the Sea Ray part # cross references to a few different Carling #'s This type of switch with momentary action is used for horns, windshield washers, solenoid activation, starting circuits, etc. Common for Marine, RV, automotive, and other 12 volt DC applications. Choose from a variety of actuators with different lenses. Actuator part numbers begin with VV. http://www.searay-parts.com/Switch-Actuator-s/387.htm For instructional videos, please visit our YouTube channel:www.youtube.com/fpmarine
Why OEM Electrical Switches Matter
OEM electrical switches are engineered for your boat's voltage and amperage specifications. They deliver reliable operation, proper electrical protection, and long-term durability in marine environments. Using correct switches prevents electrical system failures, fires, and equipment damage.
Quality electrical components ensure system safety and reliability. Always use OEM switches rated for your boat's electrical system specifications.
Quick FAQs
Will this switch fit my boat?
Designed for Sea Ray and other standard boats. Electrical switches must match your boat's voltage and amperage specifications. Verify compatibility before ordering. Contact [email protected] with your boat model and electrical system details.
What's the difference between Single Pole and Double Pole?
Single Pole switches control one circuit. Double Pole switches control two independent circuits simultaneously. Choose based on your boat's electrical configuration. Contact [email protected] if unsure which type you need.
What's the difference between Momentary and Locking?
Momentary switches activate only while pressed. Locking (or toggle) switches stay in position until toggled again. Choose based on your application. Wrong type can cause electrical system issues.
Can I use any electrical switch?
No. Electrical switches must match your boat's voltage (12V, 24V, etc.) and amperage rating exactly. Using wrong switches risks electrical fires and system failure. Always use OEM switches rated for your specific boat system. Never substitute with automotive or general-purpose switches.
Do you have switches for older boat models?
Yes. We stock electrical switches for boats from 1980s-current production. Contact [email protected] with your boat's model year and electrical system specifications.
Internal Reference:
ELC-009029