Home > Electrical > Gauges >

OIL-24 Volt Sea Ray replacement gauge, 0-100 psi oil Pressure for 24V systems 86193
p1140297,8


 
Alternative Views:


Our Price: $63.98

Product Code: GAUGE86193FOIL24V

Description
 
Original Sea Ray Legend Series Replacement Instrument

  • 12 Volt
  • Original replacement gauge for most Sea Ray boats from the mid 1990's through 2002ish.
  • Stainless steel trim ring. Also a direct replacement for the earlier gauges that had black or gray plastic trim rings.
  • Sea Ray part #? Teleflex part# 86193F (printed on the side of the gauge)
  • Oil pressure 0-100 psi
  • 24 volt, will not work with the majority of boats that have 12V gauge systems (if in doubt, check your wiring with a voltmeter and look for "24V" printed on the side of the gauge and/or on the back of the gauge where the specifications are printed.)
  • 2" cutout diameter, outside diameter of trim ring is approximately 2-1/4"
  • All gauges are tested on a gauge tester before shipping, If your replacement gauge does not operate properly, double check the connections. Occasionally, the terminals on the back of the gauge will be labeled correctly, but they will be opposite from your original gauge. Do not discard your old gauge until you have verified proper operation.
  • These are New Old Stock gauges (NOS) Some may have small dust particles behind the lens, we ship the best units first, we will not ship any gauges with significant flaws.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Electrical > Gauges
Gauges
Electrical
Gauges > Legend Series