|
Running Gear Flounder Pounder Marine
Surplus Boat Parts - 750 - C Mullet Dr. Cape
Canaveral, FL 32920 ph 321-868-1688 www.FPmarine.com |
Click here to go to our main page/full parts menu
| Misc |
| Description | Part # and Price | |
 |
Bronze tie bars/rudder supports 1-1/4" bore. 24" x 2" SeaRay part # 143446. Casting # 27415. | P1070050 - $100 ea. |
 |
Rudder Tie Bar, 45" length, 27-7/8" from one end to the connection tab. Stainless steel, new. For Boston Whaler 34 Defiance part# 1154905 | P1050602 - $125 |
 |
Tides Marine - Strong shaft seal - 036109 - 2-1/2" . Seal # 8497lup | P1070536 - $375 |
 |
Tides Marine. Strong shaft seal for 2" shaft. Nice almost brand new unit needs seal. Serial # 095395 | P1040505 - $300 |
 |
Mercury Quicksilver floating propeller wrench | P1030782 - $10.50 - |
 |
Coupler for 3" shaft - 12 bolt | P1030648 - $550 |
 |
1-3/4" shaft coupler. 6 holes.
7/16" keyway 4-3/4" flange |
P1030634 - $75 |
 |
1" shaft coupler. 4 hole, 3-3/4" flange. 1/4" keyway | P1030644 - $40 |
 |
Trellex Morse standard rubber sleeve
bearings - Cutlass bearings/strut bearings flatfish 1-1/2" x 2" x 6" dogfish 1-3/8" x 2" x 5-1/2" Most sizes available from 3/4" to 3-1/2" shaft - email for discount pricing! |
P1030635 - $75 ea. |
 |
Spool of 3/16" packing | P1030636 - $25 |
 |
1" shaft seal. 1/4" cooling
port, 1-1/2" hose i.d. TrellexMorse - Trellcom Marine uses seal 9257-LUP |
P1030638 - $100 |
 |
Pair of shaft seals - packing type.
1-3/8" uses 2" hose |
P1030639 - $100/pr. |
 |
1-1/4" dripless rudder shaft seal by
Tides Marine. Comes with threaded fiberglass insert. uses seal 5728- LUP |
P1030641 - $215 |
 |
1-3/8" Tides dripless shaft shaft
seal. 2" hose i.d. Strong seal by Tides Marine uses seal 15099-LUP |
P1030642 - $225 |
 |
2-1/2" Tides dripless shaft seal. Two
3/8' ports, 3-1/2" hose i.d. Strong seal by Tides Marine #8497-01-9-98 uses seal 8497-LUP |
P1030643 - $375 |
 |
1-3/4" shaft seal with ring, 4"
hose i.d. uses seal 15557 LUP |
P1030646 - $295 |
 |
1-3/4" Tides dripless shaft seal w/
3/8" port, 3" hose i.d. Strong seal by Tides Marine ser # 021807 uses seal 15557 LUP |
P1030645 - $295 |
 |
1-1/2" rudder shaft seal Strong seal by Tides Marine ser # 053083 uses seal 9041-lup-3 |
P1030747 - $275 |
Propellers - Tons of propellers just arrived!, partial list below
| Description | Part # and Price | |
 |
Nice selection of Yamaha props just arrived. Super rare stainless steel props for smaller engines and a good selection for the K style gearcase | |
 |
Hold-down bracket for spare propeller set. All stainless steel. Separates in the middle and secures props in place safely. For shaft sizes 2-3/4" - 3" | P1040313 - $39 |
 |
Yamaha TRP propeller sets available. Fits only special Yamaha outboard twin rotation propeller gearcases. |
P1020287 - $650/set
|
 |
INBOARD PROPS - CALL or EMAIL US - huge inventory |  |
Be sure to scroll through the whole list, they are not in
perfect order. There are some small misc props at the bottom of the list
| 1 | |||||||||||||
| 2 | |||||||||||||
| 3 | ACME | 17 | x | 16 | 1-1/2" | LH | 4 | No | Nibral | 1471 | |||
| 4 | ACME | 17 | x | 16 | 1-1/2" | RH | 4 | No | Nibral | 1470 | |||
| 7 | H&S | Hy-Torq | 17 | x | 20 | 1-1/2" | LH | 3 | No | Nibral | GQ 640 | ||
| 8 | H&S | Hy-Torq | 17 | x | 20 | 1-1/2" | RH | 3 | No | Nibral | GQ 643 | ||
| 9 | |||||||||||||
| 10 | |||||||||||||
| 11 | H&S | Hy-Torq | 18 | x | 16 | 1-1/2" | LH | 4 | #5 | Nibral | HZ 462 | ||
| 12 | H&S | Hy-Torq | 18 | x | 15.5 | 1-1/2" | RH | 4 | #5 | Nibral | HZ 463 | ||
| 13 | Teign Bridge | 18 | x | 17.5 | 1-1/2" | LH | 4 | No | Nibral | 0699172 | |||
| 14 | Teign Bridge | 18 | x | 17 | 1-1/2" | RH | 4 | No | Nibral | 0699177 | |||
| 15 | ACME | 17.5 | x | 16 | 1-1/2" | LH | 4 | No | Nibral | MOD-90 | |||
| 16 | ACME | 17.5 | x | 16 | 1-1/2" | RH | 4 | No | Nibral | MOD-90 | |||
| 17 | Teign Bridge | 18 | x | 19 | 1-1/2" | LH | 3 | No | Nibral | 0596576 | |||
| 18 | Teign Bridge | 18 | x | 18.5 | 1-1/2" | RH | 3 | No | Nibral | 0596415 | |||
| 19 | Teign Bridge | 18 | x | 18 | 1-1/2" | LH | 3 | No | Nibral | 0614812 | |||
| 20 | Teign Bridge | 18 | x | 17.5 | 1-1/2" | RH | 3 | No | Nibral | 0614813 | |||
| 23.5 | H&S | 18 | x | 22 | 1-1/2" | LH | 4 | nibral | GZ197 | ||||
| 24.5 | H&S | 18 | x | 21.5 | 1-1/2" | RH | 4 | nibral | GZ198 | ||||
| 23 | H&S | DQX | 18 | x | 22 | 1-1/2" | LH | 4 | 5 cup | brz | HX 804 | ||
| 24 | H&S | DQX | 18 | x | 21.5 | 1-1/2" | RH | 4 | 5 cup | brz | HX 803 | ||
| 24.3 | Dymex | 19 | x | 20 | 1.75 | RH | 3 | used | 314436 | ||||
| 24.4 | Dymex | 19 | x | 20 | 1.75 | LH | 3 | used | 314437 | ||||
| 24.5 | Federal Super | 19 | x | 19 | 1.5 | RH | 3 | 61416 | |||||
| 25 | FJ-Teign B? | pair w/34 | 21 | x | 22.5 | 1-1/2" | RH | 4 | No | Nibral | A0349 | ||
| 26 | FJ-Teign B? | pair w/35 | 21 | x | 22 | 1-1/2" | RH | 4 | No | Nibral | Z4718 | ||
| 27 | FJ-Teign B? | 21 | x | 23 | 1-1/2" | LH | 4 | No | Nibral | Z9147 | |||
| 28 | FJ-Teign B? | 21 | x | 22.5 | 1-/2" | RH | 4 | No | Nibral | W8446 | |||
| 29 | H&S | 19 | x | 17 | 1-1/2" | RH | 4 | light | Nibral | HD 725 | |||
| 30 | H&S | 19 | x | 17 | 1-1/2" | LH | 4 | light | Nibral | HD 724 | |||
| 30.1 | 19 | x | 19 | 1.75 | LH | 3 | new | 325063 | |||||
| 30.2 | 19 | x | 19 | 1.75 | RH | 3 | new | 325062 | |||||
| 30.3 | Mich dynjet | 19 | x | 19 | 1.75 | LH | 3 | used | 314361 | ||||
| 30.4 | Mich dynjet | 19 | x | 19 | 1.75 | RH | 3 | used | 314360 | ||||
| 31 | H&S HyTorq | single | 20 | x | 21 | 1.5 | LH | 4 | new | Scott | |||
| 32 | FJ-Teign B? | 21 | x | 23 | 1-1/2" | LH | 4 | No | Z4700 | ||||
| 33 | FJ-Teign B? | 21 | x | 22.5 | 1-1/2" | RH | 4 | No | Z4745 | ||||
| 34 | FJ-Teign B? | pair w/25 | 21 | x | 23 | 1-1/2" | LH | 4 | No | Z0477 | |||
| 35 | FJ-Teign B? | pair w/26 | 21 | x | 22.5 | 1-1/2" | LH | 4 | No | W6930 | |||
| 36 | FJ-Teign B? | pair w/64 | 21 | x | 22 | 1-1/2" | RH | 4 | No | V8160 | |||
| 37 | Teign Bridge | 21 | x | 23 | 1-1/2" | LH | 4 | 45540-2 | |||||
| 38 | |||||||||||||
| 39 | Teign Bridge | 23 | x | 23 | 1-1/2" | RH | 4 | No | 0203566 | ||||
| 40 | Teign Bridge | 23 | x | 23 | 1-1/2" | LH | 4 | No | 0203567 | ||||
| ITEM | MFG | MODEL | DIAMETER | PITCH | SHAFT | HAND | BLADES | CUP | DAR | MAT'L | LOCATION | S/N | |
| 41 | H&S | 18 | x | 20 | 1-1/2" | LH | 4 | No | HL 555 | ||||
| 42 | H&S | 18 | x | 20 | 1-1/2" | RH | 4 | No | Nibral | 350270X (P/N) | |||
| 43 | H&S | Hy-Torq | 18 | x | 22 | 1-3/4" | LH | 4 | light | need scuff | JA 223 | ||
| 44 | H&S | Hy-Torq | 18 | x | 22 | 1-3/4" | RH | 4 | light | need scuff | HH 179 | ||
| 45 | 20 | x | 15 | 1.5 | LH | 4 | used/paint | scott | |||||
| 46 | 20 | x | 15 | 1.5 | RH | 4 | used/paint | scott | |||||
| 47 | FJ-Teign B? | 22 | x | 25 | 2" | RH | 4 | No | V9015 | ||||
| 48 | FJ-Teign B? | 22 | x | 25 | 2" | LH | 4 | No | V9040 | ||||
| 49 | FJ-Teign B? | 22 | x | 25 | 2" | LH | 4 | No | W6904 | ||||
| 50 | FJ-Teign B? | 22 | x | 25 | 2" | RH | 4 | No | W6951 | ||||
| 51 | Federal | Equipoise | 20 | x | 25 | 1.75 | LH | 3 | 68679 | ||||
| 52 | Federal | Equipoise | 20 | x | 25 | 1.75 | RH | 3 | 68680 | ||||
| 52.5 | H&S | Hy-Tq-single | 21 | x | 24 | 1-1/2" | RH | 4 | medium | Nibral | CP932 | ||
| 53 | H&S | Hy-Torq | 24 | x | 32 | 2" | LH | 4 | No | Nibral | HD 181 | ||
| 54 | H&S | Hy-Torq | 24 | x | 31 | 2" | RH | 4 | No | Nibral | HD 184 | ||
| 55 | H&S | Hytq-single | 24 | x | 22 | 1.75 | LH | 4 | used | fat hub | scott | ||
| 56 | H&S | Hy-Torq | 24 | x | 32 | 2" | RH | 4 | No | Nibral | HD 182 | ||
| 57 | ACME | pair w/96 | 22 | x | 25V | 2" | RH | 4 | No | 012 | |||
| 58 | ACME | pair w/95 | 22 | x | 26 VP | 2" | LH | 4 | No | 745 | |||
| 59 | H&S | Hy-Torq | 22 | x | 27 | 2" | RH | 4 | y | nibral | HH910 | ||
| 60 | H&S | Hy-Torq | 22 | x | 27 | 2" | LH | 4 | y | nibral | HH906 | ||
| 61 | H&S | Hy-Torq | 22 | x | 27 | 2" | RH | 4 | lcup | nibral | HT786 | ||
| 62 | H&S | Hy-Torq | 22 | x | 27 | 2" | RH | 4 | y | nibral | HE870 | ||
| 63 | Teign Bridge | pair w/85 | 21 | x | 25 | 1-1/2" | RH | 4 | No | 0593349 | |||
| 64 | FJ-Teign B? | pair w/36 | 21 | x | 22.5 | 1-1/2" | LH | 4 | No | A3069 | |||
| 65 | 24 | x | 24 | 1.75 | RH | 4 | used | scott | BDP81538 | ||||
| 66 | Teign Bridge | 21 | x | 27 | ??odd | RH | 4 | mod | propbuster | ||||
| 67 | Teign Bridge | 21 | x | 27 | ?? Odd | LH | 4 | mod | propbuster | ||||
| 68 | Teign Bridge | 22 | x | 23.5 | 1-1/2" | LH | 4 | No | 0593350 | ||||
| 69 | Teign Bridge | 22 | x | 23 | 1-1/2" | RH | 4 | No | 0593351 | ||||
| 70 | Federal | equiquad | 24 | x | 22 | 1-3/4" | LH | 4 | reconditioned | ||||
| 71 | Federal | equiquad | 24 | x | 22 | 1-3/4" | RH | 4 | reconditioned | ||||
| 72 | H&S | Hy-Torq | 23 | x | 22 | 2" | RH | 4 | light | Nibral | ET 821 | ||
| 73 | H&S | Hy-Torq | 23 | x | 22 | 2" | LH | 4 | light | Nibral | ET 820 | ||
| 74 | |||||||||||||
| 75 | H&S | Hy-Torq | 24 | x | 22 | 1.5 | LH | 4 | new | scott | BB741 | ||
| 76 | H&S | Hy-Torq | 24 | x | 22 | 1.5 | RH | 4 | new | scott | BB742 | ||
| 77 | H&S | Hy-Torq | 23 | x | 25 | 1.75" | RH | 4 | new | SR#1876054 | |||
| 78 | H&S | Hy-Torq | 23 | x | 25 | 1.75" | LH | 4 | new | SR#1876055 | |||
| 79 | H&S | Hy-Torq | 23 | x | 25 | 1.75" | LH | 4 | new | SR#1876055 | |||
| 80 | H&S | Hy-Torq | 23 | x | 25 | 1.75" | RH | 4 | new | SR#1876054 | |||
| 81 | Teign Bridge | 21 | x | 23 | 1.75 4.85"Z | RH | 4 | new | SR#1765733 | ||||
| 82 | Teign Bridge | 21 | x | 21 | 1.75 | RH | 4 | 0643 | |||||
| 82.1 | Teign Bridge | 21 | x | 21 | 1.75 | LH | 4 | 3cup | 0643 | ||||
| ITEM | MFG | MODEL | DIAMETER | PITCH | SHAFT | HAND | BLADES | CUP | DAR | MAT'L | LOCATION | S/N | |
| 83 | H&S | Hy-Torq | 22 | x | 23 | 1.5" | LH | 4 | new | SR#1851747 | |||
| 84 | H&S | Hy-Torq | 22 | x | 23 | 1.5" | LH | 4 | new | SR#1851747 | |||
| 84.1 | Teignbridge | 21 | x | 20 | 1.75 | LH | 4 | nibral | JA019 | ||||
| 84.2 | Teignbridge | 21 | x | 20 | 1.75 | RH | 4 | nibral | JA020 | ||||
| 85 | Teign Bridge | pair w/63 | 21 | x | 24.5 | 1-1/2" | LH | 4 | No | 0593348 | |||
| 86 | FJ-Teign B? | pair w/98 | 21 | x | 22 | 1-1/2" | RH | 4 | No | W0662 | |||
| 87 | Teign Bridge | 22 | x | 23 | 1-1/2" | LH | 4 | No | 0208202 | ||||
| 88 | Teign Bridge | 22 | x | 22.5 | 1-1/2" | RH | 4 | No | 0208201 | ||||
| 89 | FJ-Teign B? | 21 | x | 22 | 1-1/2" | RH | 4 | No | W4890 | ||||
| 90 | FJ-Teign B? | 21 | x | 22 | 1-1/2" | LH | 4 | No | W5938 | ||||
| 93 | Teign Bridge | Canada | 21 | x | 23 | 1.75 | RH | 4 | nibral | dyn bal | GPO70128 | ||
| 94 | Teign Bridge | Canada | 21 | x | 23 | 1.75 | LH | 4 | nibral | dyn bal | GPO70127 | ||
| 95 | ACME | pair w/58 | 22 | x | 26PV | 2" | RH | 4 | No | 744 | |||
| 96 | ACME | pair w/57 | 22 | x | 25 V | 2" | LH | 4 | No | 011 | |||
| 97 | Teign Bridge | single | 21 | x | 22.5 | 1-1/2" | LH | 4 | No | GP 04145 | |||
| 98 | FJ-Teign B? | 21 | x | 22.5 | 1-1/2" | LH | 4 | No | Z3229 | ||||
| 98.1 | H&S | Hy-Torq | 21 | x | 23 | 1.75 | LH | 4 | nibral | ET331 | |||
| 98.2 | H&S | Hy-Torq | 21 | x | 23 | 1.75 | RH | 4 | nibral | HT753 | |||
| 99 | H&S | pair w/54 | 24 | x | 31 | 2" | LH | 4 | No | Nibral | HD 183 | ||
| 100 | Michigan | 24 | x | 28 | 1.75 | RH | 4 | red paint | scott | ||||
| 101 | Michigan | 24 | x | 28 | 1.75 | LH | 4 | red paint | scott | ||||
| 102 | H&S | HyTq single | 22 | x | 25 | 2" | LH | 4 | light | GE 434 | |||
| 103 | 30 | x | 33 | 2-1/2" | LH | 5 | No | 43032 | |||||
| 104 | 30 | x | 33 | 2-1/2" | RH | 5 | No | 43031 | |||||
| 105 | H&S | Hy-Torq | 30 | x | 32.5 | 2-1/2" | RH | 5 | No | Nibral | GP 070066 | ||
| 106 | H&S | Hy-Torq | 30 | x | 32.5 | 2-1/2" | LH | 5 | No | Nibral | GP 070066 | ||
| 107 | H&S | Hy-Torq | 30 | x | 37 | 2-1/2" | LH | 4 | #5 | ||||
| 108 | H&S | Hy-Torq | 30 | x | 37 | 2-1/2" | RH | 4 | #5 | ||||
| 109 | |||||||||||||
| 110 | |||||||||||||
| 111 | 30 | x | 34 | 2-1/2" | RH | 4 | No | 43030 | |||||
| 112 | 30 | x | 34 | 2-1/2" | LH | 4 | No | 43029 | |||||
| 113 | |||||||||||||
| 114 | |||||||||||||
| 115 | |||||||||||||
| 116 | |||||||||||||
| 117 | H&S | Hy-Torq | 30 | x | 33 | 2-1/2" | RH | 4 | No | JC511 | |||
| 118 | H&S | Hy-Torq | 30 | x | 33 | 2-1/2" | LH | 4 | No | JC510 | |||
| 119 | |||||||||||||
| 120 | |||||||||||||
| 130 | 15 | x | 11 | 1.25 | RH | 3 | |||||||
| 131 | 16 | x | 20 | 1.25 | RH | 3 | |||||||
| 132 | 12 | x | 8 | 0.875 | LH | 2 | |||||||
| 133 | |||||||||||||
| 134 | 18 | x | 13 | 1 | RH | 2 | |||||||
| 135 | |||||||||||||
| 136 | 19 | x | 11 | 1.25 | RH | 3 |
|
EMAIL us with any questions: Sales@FPmarine.com or call 321-868-1688 |
Flounder Pounder Marine & Trading Co., Inc. 750-C Mullet Dr. Cape Canaveral, FL 32920 ph 321-868-1688 fax 321-868-1680