Click here to go to our main page/full parts menu   

Pumps

	Description	Part # and Price
	Huge load of 1" and 1-1/4" hardwall w/wire. Also fuel hose and red water hose. Mostly cut lengths 3'-8' Huge discounts for large quantities (barrel full)
	Hardwall exhaust, waste, water hose, Also fuel hose in all sizes
	SHURflo Blaster 24VDC 3.2 gpm, 45 psi, 5 amp max.  model # 2095-272-244. surplus unit is new, but a little dusty	P1030637 - $100
	Pumpguard strainers. 3/4" in and out. Stainless steel screen can be removed for cleaning. A must for all raw water intakes. Installs between water pickup and pump inlet.	P1020775 - $5 ea. or 3 for $10
	Bilge Pump, 450 gallons per hour 3/4" discharge port 1.5 amp, 1 yr warranty	$13.95
	Bilge pump 600 GPH 3/4" discharge port 3.5 amp 1 yr warranty	$23.95
	Bilge pump 800 GPH 3/4" discharge port, 2 yr warranty	$23.95
	Bilge pump 1100 GPH 1-1/8"" discharge port, 2 yr warranty	$29.95 19231
	Bilge pump 1500 GPH 1-1/8" discharge port, 8 amp 1 yr warranty Bilge pump 2000 GPH 1-1/8" discharge port, 10 amp 1 yr warranty	1500 GPH $40.95 2000 GPH $49.95
	Automatic float switch for 1500 GPH and 2000 GPH pumps	$22.95
	Automatic float switch - 1 year warranty. 15 amp max, best used with bilge pumps 1500gph and under.	19401 - $14.95

Fittings & Accessories

	Description	Part # and Price
	Moen towel holder, high quality platinum/chrome. Villeta series YB 3686PMC. 8" x 6" ring  2-3/8" x 3" mounting surface	P1070046 - $15ea.
	Washdown/livewell Y-valve. internally threaded for 1/2"ips. comes with 3/4" hose barb fittings in straight or 90°. Removable travel stop ring converts from 2 to 3 position. Retail price $40. Bosworth co. E. Providence, RI.	P1060493 - $25
	Sea Tech and whale hose. Plenty to complete your water system. Pre fab hoses with crimped ends in various lengths. Also hard 15mm and 22mm tubing. Lots of different fittings.	Colored tubing 15mm - $1/ft.  22mm - $1.35/ft Fittings $3 - $9 Pre fab hose $1.50/ft
	Sea Tech TPM-SG-12-08-SEC water distribution manifold. 4 hot ports and 8 cold ports. These manifolds control all of the accessories in your vessel. Each port can easily be closed off when not in use or to isolate leaks. We have a full selection of rigid hose, fabricated hose and fittings	P1080152 - $199
	SeaTech 5 port fresh water distribution manifold. Central location cto control your faucets, taps, showers, heads, etc. Each sector can be shut down individually in case of leak. Uses 15 and 22 mm Whale or SeaTech tubing	P1040484 - $100
	Grohe drain assembly, 28-957-040. High quality marine grade chrome over brass. Nice heavy duty unit. 1-1/4"	P1060394 - $25
	Scandvik sprayers from left: Straight standard trigger sprayer (1/2" male thread) #10279 Elbow standard trigger sprayer (15/1 female metric thread) #10278 Straight push button sprayer handle (1/2" male thread) #10283	10279-Std sprayer- $21.99 10278-Std sprayer w/elbow - $28.99 10283-Pushbutton sprayer - $34.99
	Scandvik Euro elbow trigger sprayer handle (15/1 metric thread) White or black available. #14000, black #14001	Euro elbow sprayer  14000/14001- $28.99
	Scandvik faucet/shower with mixing valve. hot/cold with 6' chrome spiral hose and chrome euro style trigger sprayer with elbow. Also includes hanger for sprayer.	$sold, but we have similar ones
	Scandvik cockpit shower kits (pictured at left) #12106 Replacement handle - $34.99 white (pic above)	$64.95
	Scandvik 6' replacement hoses. Rubber washers included. 1/2" NPT female, 3/8" NPT female, or 15/1 male metric	vinyl - $15 ea. chrome spiral/plastic liner - $25 Chrome flex - no core - $50
	Shur Flo Shower kit. Hose, grommet kit, and high quality heavy duty spray head with on/off button	P1010308 - $65.00
	Scandvik Cobra shower bar kit. Handle can slide up and down and be fixed at any position on the rail. 24" rail. Chrome over brass. On/off valve on shower head. 5' nylon hose with chrome/brass cover.	P1020501 - $59-
	Perko transom scuppers. 2-3/4" o.d., 1-5/8" hole spacing	$5 ea.
	Stainless steel tank vent 5/8" hose barb. Protective splash shield & screen. These are very nice solid polished stainless steel vents.	GEM #4499 - $7.50ea
	Stainless steel 90° deck drain. 2" OD hose barb.4-1/4" total height. Brand new sold in pairs only	P1030335 - $15ea.
	Plastic acrylic coated deck fill inserts. Safe for fuel fills, water fills, waste outlets, etc. Perfect for mounting on vertical bulkheads to conceal and protect fittings. Many many uses. 1-7/8" hole can be enlarged. Pocket can accept a 3" diameter fitting. 4-3/4" x 4-3/4". Also double size available. See PLASTICS page for more	#10086 - $11.70 ea
	Plastic 90° deck drain. 3-1/2" screen. 3" depth, 1-1/2" hose barb. Hose barb tilts down at slight angle to assist complete drainage.	$7 ea
	Livewell spigot sprayer with on/off valve. 3/4" hose barb fitting	P1020155 - $15
	Perko washdown hose fitting. includes 90 degree 3/4" hose barb fitting. 2-3/4" diameter flange. new	P1060531 - $15

Faucets and Taps

Grohe sink faucet with removable sprayer. brushed stainless finish. "Alira" series 32999 - P1080021 $349	Grohe basin tap, single handle lavatory centerset. brushed stainless finish "Talia" series 33162RRO- P1080023 $249	$249 Shower insert with hot/cold mixer and pull out sprayer with long hose	$269 Shower insertw/door. Hot/cold mixer and pull out sprayer with long hose.
$74 ITC shower kit, stainless steel cup, includes sprayer and hose.	Shur Flo hose, sprayer and grommet. limited qty. $35	$209 w/chrome hose #46002	shower insert box $35
$189 Ceramic mixer with folding spout.  1" mounting hole. flex supply hoses	$129 Compact basin tap, folding and swivel 7-3/8" tall spout. 5/8" mount hole	$42 fold down tall cold water tap with plastic knob. 5/8" mount hole	$179 fold down mixer. white or chrome. Two 5/8" mount holes
$135 Mixer, swivel spout, different spouts avail.1" mount hole	#14315 $135 swivel mixer with tall spout.1/4 turn ceramic valves. 1" mount hole.	$269 mixer with classic knobs and drain kit	$149 basin mixer. heavy duty cast spout 1" mount hole	$185 single lever mixer with tall 360 swivel spout. ceramic valve cartridge. 1-1/4" mount hole
$149 basin mixer with pop-up drain 1-3/8" mounting hole. 5-7/8" height. Avail w/ gold trim (70250)	$249 Galley mixer with pull-out sprayer and 2 spray patterns.1-3/4" mounting hole. Gold trim (70251)	$209 basin mixer with pull-out spray handle. can be used as shower. does not swivel. 1-1/2" mount hole	$249 swivel spout galley mixer with pull-out adjustable sprayer. 1-1/2" mount hole	$149 compact galley mixer with long spout, 1-1/4" mount hole
$69.99 solid cast chrome plated brass cold water tap 7/8" mounting hole. 3-5/8" height	$46 counter top or bulkhead control valve, cold only. chrome/brass with plastic knob. 3/4" mount hole
$229 galley mixer single lever control, tall J spout 13" height. 1-3/8" mount hole	$135 single lever cold water tap compact, 1-3/8" mount hole 4-1/2" height	$249 Single lever compact mixer. 5-7/8" height, 6-7/8" length. 1-3/8" mount hole	14420, $189 mini mixer. 5-3/8" height, 6-1/4" length
$51.99 Bulkhead mount soap dish. Rubber insert - no vibrations. chrome/brass with glass dish.	$51.99 Bulkhead mount soap dish. Rubber insert - no vibrations. chrome/brass with glass dish.
$135 compact bulkhead mount shower mixer. 1-5/16" hole. 2-1/2" height	$135 single lever shower mixer. 1-5/16 mount hole, larger unit that the 10500	$199 single lever shower mixer, matches 70106 family above. 7-1/4" diameter trim plate. 2" mount hole	$156 single lever shower mixer 1-5/16" hole size. large trim ring 4-9/16" diameter.

SINKS 

These Scandvik marine and RV stainless steel sinks are premium quality. 304 stainless in a satin or mirror finish. The prices are approximately 75% off retail. There are deeper discounts for the damaged units. All units may have some minor scratches or imperfections. Very few have mounting studs, but most do have nuts welded to the underside of the flange. They can be secured with adhesive caulk. All units have standard 2" Marine and RV drains unless noted. Currently we have quantities of some of the sizes, so email us if you need one undamaged.

	Description	Part # and Price
DRAIN KITS - DRAIN KITS	Double drain kit  -for 2-7/16" drain opening single low profile 90° drain -for 2-7/16" drain opening Single straight down drain -for 2-7/16" drain opening	$49.99 $21.00 $16.00
	1. Scandvik 10203 2. Scandvik 10201 3. Scandvik 10923 - $107
	1. Scandvik 10241 2. Scandvik 10243 3. Scandvik 10211
	Paragon Plastics oval sink. UV stable acrylic coating. White in color 13" x 10-1/8" x 5"d. 3/4" flange so cutout is 11-1/2" x 8-5/8" Accepts 2-1/4" drain	$29.99 ea
	11.5 x 4.5 - 3/4" flange, 2-7/16" drain opening	P1020552 - $49
	11.5 x 5 - 3/4" flange, 2-7/16" drain opening	P1020550 - $49
	13.25 x 4.5 - 3/4" flange, 2-7/16" drain opening	P1020548 - $69
	16 x 8 - 1-1/8" flange, 2-7/16" drain opening	P1020544 - $129
	17.5 diameter x 7" depth, 2-7/16" drain opening	P1030325 - $99
	18 x 8 - 1-1/8" flange, 2-7/16" drain opening	P1020541 - $129
	18.5 x 8 - 1-1/8" flange, 2-7/16" drain opening	10250 - $149
	#10214 - 12-13/16 x 9-15/16 od x 6"d - 9" x 11-7/8" id - 2-7/16" drain opening #10216 - 13-1/2 x 12-3/4 od x 6"d - 12-9/16 x 11-13/16 id - 2-7/16" drain	P1020521 - $99
	17.5 x 21.5 x 12 Under counter mount. #10662  Dent in corner, household 3-5/8" drain	P1020531 - $249
	15 x 25 x 8 (11.5/11.5) #10239 Under counter mount - no dings, 2-7/16" drain opening	P1020537 - $299
Scandvik sinks in stock:	10203, 10211,10214, 10216, 10219, 10228, 10239, 10241, 10242, 10243, 10244, 10246,  10250, 10281, 10662, 10757, 10923, 14289, 14291

VACUFLUSH heads - several to choose from	$175 Head
HOSE - Hardwall exhaust hose, softwall, rigging hose, fuel hose, water hose, waste hose.  Whale quick connect water hose (pictured).	Cut to order.

www.FPmarine.com

Email us at sales@fpmarine.com

Flounder Pounder Marine & Trading Co., Inc. 750-C Mullet Dr. Cape Canaveral, FL 32920 ph 321-868-1688 fax 321-868-1680