Fiberglass Parts

Fiberglass Parts & Consoles

Flounder Pounder Marine Surplus Boat Parts - Cape Canaveral, FL 321-868-1688 www.FPmarine.com

Click here to go to our main page/full parts menu
CALL TO PLACE AN ORDER

Center consoles, side consoles, Leaning post/livewell combo's, Radar arches, Full floor decks, Hardtops, electronics boxes, insert tubs, Fiberglass hatch lids and doors, Fiberglass mat. and more!

New arrival - Fiberglass mat and roving. $1.25 per lb. We will discount further for pallet quantity.


Fiberglass mat for vacuum bagging, RTM parts. 3 pallets of 4 rolls each available. cheap!	24oz, woven roving 25" wide - $85 ea.	2.0 oz. mat 10" rolls 2rolls per box. Approximately 80-100 boxes available. $20 per roll

Consoles, livewells & Misc.

See structures page for hardtops
LEANING POST. Very nice slightly used basic fiberglass leaning post. Backside is open for storage, livewell, fuel tank, tackle station, or cooler.	flange measurement 21" x 39-1/2"width 30"height	$425

LIVEWELL, Built-in fiberglass livewell with fiberglass lid. Fittings and light maybe good, but plan on replacing them.	Top flange can be cut to approx. 21" x 21" tank depth 21" square shape with rounded corners. 17-1/2" x 16-1/2" inside dimensions overall height 27-1/2"	$400

LIVEWELL- fiberglass, new. no hardware, no lid.	32" x 20" x 17-1/2" height Tank is 16" diameter and 12" height	$150
Built in livewell assembly. All fiberglass. Has drains, screen, etc. Nice large deep unit. Will require fabrication to adapt into your boat. Fittings and light maybe good, but plan on replacing them.	20" diameter top surface. 17" diameter x 23" inside height 31" overall height from bottom of drain to top surface of the lid	$350
	Originally from a Boston Whaler 275 CQ
New console, 2 piece, lightweight. The two sections are not attached. You can choose to hinge it or secure it all the way around with screws. Nice area for foot clearance. Includes access hatch. Not assembled, does not include hardware.	12" x 31" footprint 32" overall width 31" height 24" overall length front to back 31" x 8-1/2" area for switch panel.	$450

Livewell/transom door	Entire transom from Boston Whaler 275 Conquest. Built in livewell and transom door/frame	livewell $350 Entire transom door section incl. door and latch $350
Bait prep tackle prep station with main electrical center from 2006 Boston whaler. Roughly 41" x 25" x 36"h - $1599


Dry box/cooler/step. molded for a drain. Three-piece construction. Not assembled, does not include hardware. Color is yellowed. Has Rampage logo	21-3/4" x 16-1/4" 13" height	$100
Engine Hatch - Sea Ray. Excellent condition, just minor dirt. Sand non-skid pattern	63-1/4" x 42"more detailed measurements available	P1040514 - $500
Full cockpit deck! Watertight hatches pre-molded complete with drain gutters. Long side hatches perfect for fishboxes. ( we have many different size inserts available) Center hatch is a water tight day hatch for generator access, systems access, or just bilge access. nice non skid finish Deck comes from a Boston Whaler 275 Conquest. Makes a super easy deck replacement. $worth thousands in labor.	98-1/2" x 52-1/4".	$950.00
REAR BENCH SEAT ASSEMBLY: - includes fiberglass insert which will easily adapt to most boats with solid transom. Flip-down seat assembly is fiberglass with heavy duty stainless steel hinges and fold-down legs. Original equipment from 2002 Boston Whaler. Works great with "bracket" boats or those with an integrated bracket. Pursuit, Pro-Line, Grady White, etc,	72" long x 27" high x 6" deep. It can be modified easily to 60" length and you could probably get is a few inches shorter also	$950